Electric Landing Gear – Tips and Tricks

A large passenger jet flying through a blue sky

Electric Landing Gear, or EVAC for short, is an extremely useful piece of equipment. It has been around since the 1950s and continues to be used by many major companies. But there are a lot of things that modern-day EVACs are not able to do that older models were capable of. The following article will discuss some modern-day features that can make your old model a lot more useful.

Electric Landing Gear

A small airplane is parked on the side of a road

The first thing that most people probably think of when they hear the term “landing gear” wheels. Electric landing gears that you may recall from your boyhood days revolve around a series of wheels and are used mainly for landing at airports. However, there is a newer model available now called the e-landing gear that does not have wheels. This model is powered by batteries and also has no landing runway to set on. The battery packs are actually placed under the skin of the plane so that there is no need for wheels, thus leaving some serious space in the engine to carry cargo.

Another important feature in an EVAC is the regenerative braking system. This is where the airbrushes on the landing gear are used to slow the engines. This allows for a smoother landing, thus making take-off and landings a lot easier. Because of this ability, it is very important to be able to keep the engines running at a constant speed so that you do not get stuck in rush hour traffic. The regeneration also makes take-offs more consistent.

Of course, landing gear also involves quite a bit more. There are many different types of landing aids such as anti-slip mats, pressure surfaces and roll control flaps. All of these work together to provide friction reduction and better control while landing. There are also systems that extend the life of the batteries, like regenerative cooling fans and charge rates that are lower than standard.


A motorcycle parked on the side of a car

The benefit of the electric landing gear is its efficiency. It is much less expensive than other forms of EVAC, and therefore the investment is often a lot less. However, it is important to make sure that you choose a quality product. There are a few things to look for when purchasing electric landing gear. Make sure that the system is certified by either the FAA or UL.

In order to maximize the efficiency of the landing gear, there are certain steps to take. First, you should ensure that the electric motor is pointed down the runway. Second, you need to angle the landing gear so that it touches the ground directly. This is especially important if it is your first time trying out this system. If you over-angle the system, it will be harder to land and could damage your aeroplane.

The electric landing gear is a great way to get rid of that hassle of having to wear safety gear. It will allow you to go faster and land harder. Also, as you will no longer have to worry about connecting the landing motor to your battery or using gas, it will be easier to maintain and run. It is important to note that you do not want to use an electric system on soft ground. If you do, the gear could easily break, and you will have to throw away your plane.

Bottom Line

Even if you have never flown an electric RC aeroplane before, you can still enjoy the benefits of the electric landing gear. There is no reason to fear the new technology. Instead, learn more about it so that you will be prepared for your first flight. Many hobbyists are now taking it upon themselves to learn more about electric landing gear so that they, too, can enjoy the same benefits that pilots love. Take charge of your flight today with the electric landing gear.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter